The MG22 was born of the MG series rifle suppressors. 100% hardened 17-4 Stainless Steel (190KSI tensile strength) for extreme duty and high volume shooting in all rimfire cartridges. No aluminum to damage by either excessive shooting or lack of cleaning! Designed for up to 9 length configurations, it allows the user to tune the weight and desired suppression level to their liking. It is built to run and run.
Clean it or not... it will take it. Go ahead, scrape off the baffles with your pocket knife. The MG22 doesn't care!
A 100% no-fault lifetime warranty comes standard, as with all of our products. If you kill it, we fix it, no BS!
Keep it clean and remember that after cleaning use some ablative gel (petroleum jelly or similar no toxic gel) on all internal parts before reassembly. The wipe can easily be replaced as a repair item by you or a gunsmith.
Rated for: 22LR, 22WMR, 17HMR, 17WSM, 5.7x28, 22 hornet (no barrel length restrictions)
Configuration Lengths: 6.5" approx 0.47" per baffle
Configurations Weights: 7.4oz whole assembly, each baffle weighs 0.6oz
100% Hardened 17-4 SS (hardened to 190,000 PSI tensile strength) takes all the extreme abrasion and high pressures
Baffles seal to each other via tapers for concentricity
Repairable High-Strength High-Temperature Silicone Rubber Cap Wipe (McMaster-Carr item 5787T63 and Punch 3427a17)
REMOVE WIPE FOR ALL OTHER CARTRIDGES EXCEPT 22LR RIMFIRE!
Full Auto rated
Easy to service and reconfigure
Easy to own
100% no-fault warranty, valid across the known universe and until the end of time
Won't break the bank